Advanced Menu - Allmatic BIOS2 ECO Guide Pour L'installation

6.2 Advanced menu:

MENU
. .
  
Partial opening
. .
  
Pre-flashing time (0 = disabled)
Courtesy ligth settings
. .
  
0 = At the end of movement for a TCY time
1 = Open gate light on/off
. .
  
Courtesy light time
Dead-man
. .
  
0 = disabled
1 = enabled
. .
  
Water-hammer in opening phase (0 = disabled)
. .
  
Water-hammer in closing phase (0 = disabled)
. .
  
Time of pressure in closed for hydraulic motors (0 = disabled)
Electrical lock mode
0 = disabled
1 = Active Electrical lock without preventive activation
2 = Active Electrical lock with preventive activation
3 = Magnetic Electrical Lock
Viewing of the memory location for a single transmitter
Cancellation of a single transmitter
Restore default settings, enter to modify the parameter and then keep pressed the
MENU button, a count down appears that ends with  on the display
Cancelling all transmitters, enter to modify the parameter and then keep pressed
the MENU button, a count down appears that ends with  on the display
6-1622176 rev.8 12/09/2022
DESCRIPTION
ITA ENG FRA
SELECTABLE
ESP DEU POR
VALUES DEFAULT
min-max
0-100 30
0-10 0
0-1 0
0-900 180
0-1 0
0-100 0
0-100 0
0-480 0
0-3 0
0-999
0-999
UNITS
%
s
s
x100
ms
x100
ms
minuti
7 / 12