Operation; Adjusting The Browning Level; Toasting; Stopping The Toasting Process - SilverCrest SDLT 1500 A2 Mode D'emploi

Operation

Adjusting the browning level

The desired browning level can be adjusted infi nitely from "light" (1) to "dark" (7)
using the toasting dial 6.
NOTE
► Note that, subject to the thickness of the bread in the toaster, the level of
browning can vary somewhat even if the toasting dial 6 has not been
adjusted! The fewer the number of slices inserted, the higher the browning
level. Thus, if you are not intending to toast many slices, always set the
toasting dial 6 a little lower.

Toasting

CAUTION – RISK OF FIRE!
When the appliance is in operation, do NOT cover the toasting slots 9.
►
There will be a risk of fi re! The appliance could be irreparably damaged!
1) After setting the desired browning level, insert the bread into the toasting slots 9.
2) Press the toasting lever 2 downwards. The automatic bread centring device
centres the inserted bread in the toasting slots 9.
3) When the desired level of browning has been reached, the toaster automati-
cally switches itself off and the slices are ejected upwards.

Stopping the toasting process

If you wish to stop toasting, press the "Cancel" button 3
itself off and the bread slices are ejected upwards.

Reheat function

The reheat function enables you to warm bread without browning it. As an
example, for toast that has gone cold. The bread is only briefl y warmed.
1) Insert the bread and press the toasting lever 2 down.
2) Press the "Reheat" button
lamp on the "Reheat" button
3) Once the bread has warmed up again, the toaster switches itself off auto-
matically, the indicator lamp on the "Reheat" button
bread slices are ejected upwards.
SDLT 1500 A2
4. During the heating process, the indicator
4 lights up.
. The toaster switches
4 goes out and the
31
GB