Setting Up; Before First Use; Operation; Adjusting The Browning Level - SilverCrest SLTG 1100 A1 Mode D'emploi

Setting up

CAUTION – RISK OF FIRE!
► You should therefore never locate the appliance close to or underneath in-
flammable objects, especially not under curtains or suspended cupboards.
■ Unwind the cable completely from around the cable retainer
■ Place the appliance on a level and heat-resistant surface.
■ Insert the plug into a mains socket.
NOTE
► When the toaster is not in use, always remove the plug from the mains power
socket. This is the only way to ensure that the appliance is current-free.
Before first use
■ Operate the toaster without bread 3 times at the maximum browning level "7".
■ Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTE
► The toasting lever
mains power socket.
► The toasting lever
► During first use, you may notice a slight smell (there may also be minimal
smoke). This is normal and dissipates after a short time. Provide for suf-
ficient ventilation. For example, open a window.

Operation

Adjusting the browning level

The desired browning level can be adjusted infinitely from "light" (1) to "dark" (7)
using the browning control
SLTG 1100 A1
only engages when the cable is connected to a
only engages when the viewing window
.
.
is fitted.
23 ■
GB│IE
│