Tips For Use; Before Fi Rst Use - SilverCrest SDLT 1500 A2 Mode D'emploi

Tips for use

GB
Before fi rst use
30
■ Diff erences in bread sorts, moisture content and the thickness of individual
slices have an eff ect on the browning of the toast. Therefore the bread for
toasting should be kept in sealed packaging until required. Always start by
trying out a lower browning level.
■ Use a lower browning level if you are toasting dry bread since dry bread
browns faster than fresh bread.
■ Set a lower browning level if you are toasting less than 4 bread slices.
■ Select a higher browning level for dark bread than for light bread, for example,
white bread.
■ To prevent the toaster from overheating and to obtain an even browning of
bread, wait for about 15 seconds between two toasting processes.
You should only use the highest level on the toasting dial 6 for large slices
■
of dark bread. With this browning level light bread will scorch and become
inedible. In addition, it may cause the generation of smoke. If this occurs,
press the "Cancel" button 3
cable from the mains power socket.
■ Operate the toaster without bread 3 times at the maximum browning level (7).
■ Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTE
The toasting lever 2 only engages when the cable is connected to a
►
mains power socket.
► With the fi rst usage a slight smell can arise (minimal smoke development
is also possible). This is normal and dissipates after a short time. Ensure
suffi cient ventilation. For example, open a window.
immediately and disconnect the power
SDLT 1500 A2