Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
INTRODUCTION
This extended air die grinder is ideal for cutting, porting, deburring and
grinding in hard-to-reach spaces. It features steel, aluminum and
plastic construction.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of
the reach of children.
4.
Do not install or use in the presence of flammable gases, dust
or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
3.
Wear protective clothing designed for the work environment
and tool.
Visit www.princ essauto.com for more inform ation
1/4 in. Extended Air Die Grinder
9029893
3
Publicité
Table des Matières
