Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
INTRODUCTION
The Low-Noise Air Die Grinder is ideal for a wide variety of cutting,
cylinder porting, weld breaking, deburring, polishing and grinding tasks.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store unused tools properly in a safe and dry location to prevent rust
or damage. Lock tools away and keep out of the reach of children.
4.
Do not install or use in the presence of flammable gases, dust or
liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
Visit www.princessauto.com for more information
Low-Noise Air Die Grinder
8844243
3
Publicité
Table des Matières
