PRO-POINT 9029893 Mode D'emploi page 7

V1.0
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3. Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is
dangerous and can cause an injury. A qualified technician must
repair and verify the power tool is operating correctly, before it can
be used.
4. Do not cover the air vents. Proper cooling is necessary prevent
damage to the tool's motor.
5. Avoid unintentional starts. Ensure the switch is off when connecting
to the power source.
6. Disconnect the power source before installing or servicing the tool.
7. Remove adjusting keys and wrenches before using the tool. The
tool may eject an attached wrench or a key and cause an injury to
you or a bystander.
8. Never point the tool towards yourself. It could inflict an injury.
9. Never force the tool. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under no
load, but roughly under load.
10. Keep hands and fingers away from the work area. Any part of the
body contacting the tool's working parts could result in an injury.
11. Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
12. Never touch the tool accessory or workpiece during or immediately
after use. They may be hot and could inflict a burn injury.
13. Take work breaks to prevent the tool's motor from overheating
and/or overloading.
14. The tool can develop high pressure. Use safety glasses and gloves
for protection during operation. Keep hands clear of the exposed
rubber portions of the hose.
Visit www.princ essauto.com for more inform ation
1/4 in. Extended Air Die Grinder 9029893
7