Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9029893
4.
Non-skid footwear is recommended to maintain footing and
balance in the work environment.
5.
Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
6.
The tool may contain high pressure. Use safety glasses and gloves
for protection during operation. Keep hands clear of the exposed
rubber portions of the hose.
7.
The air source used with this tool may cause hearing damage.
Wear hearing protection gear with an appropriate Noise Reduction
Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating the tool. Proper footing and
balance enables better control in unexpected situations.
4.
Keep your fingers away from the trigger/switch while carrying the
tool, attaching an air hose or an accessory. Lock the trigger/switch
safety if available.
5.
Never point the air stream or tool at any point of your body, other
people or animals. Debris and dust ejected at high speed can
cause an injury.
6.
Serious injury or death may occur from inhaling compressed air.
The air stream may contain carbon monoxide, toxic vapors or solid
particles. Never inhale compressed air directly from the pump or
air tool.
AIR TOOL PRECAUTIONS
1.
Use only clean and dry compressed air as a power source.
Contaminated or moist air will gradually damage the tool.
2.
Install an in-line shutoff valve or regulator to allow immediate control
over the air supply in an emergency, even if a hose is ruptured.
4
1/4 in. Extended Air Die Grinder
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
