Operating The Device; Configuring Microphones On The - AKG DMM8 U Mode D'emploi

operAting the Device

SYSTEM
CONTROL
DMM8 MANUAL
8 Operating the device
8.1 SYSTEM CONTROL: Changing parameters on the device
To change the parameters on the device, proceed as follows:
Step Description
Turn to the required function on the SYSTEM CONTROL
1
rotary knob, turning the rotary knob until the LED is lit at the
required function.
Modify the inputs with the selected function using the IN 1 to
2
IN 6 rotary knobs
Modify the outputs with the selected function using the OUT
3
rotary knob
The stereo record output does not have any setting options.
5 minutes after the last change, the SYSTEM CONTROL rotary knob goes
back to the LEVEL mode. 1 minute after the last change, the set value is
saved automatically.
8.2 Configuring microphones on the DMM8 U (UL, ULD)
To configure the connected microphones and accessories, proceed as
follows:
115