Stereo Master Output; Stereo Record Output; Serial Control Via Rs232 - AKG DMM8 U Mode D'emploi

Description
Stereo output
Stereo record
output
Serial control
DMM8 MANUAL
The associated gain control is located next to every input channel
(2, 4, 7, 9, 12, 14) to set the input level. The gain controls are equipped with
integrated switch for the left side stop.
The input level is set at 0 dB when the left end stop is reached By turning
the control clockwise the gain can be increased by max. 57 dB.
5.4.3

Stereo master output

OUT L
Figure 5: Stereo master output
The device has one balanced master output (16, 17). It is accessible via two
3-pin XLR sockets. The outputs are labeled OUT L and OUT R.
The OUT rotary knob on the front can be used to make settings on the out-
put level of the stereo output.
5.4.4

Stereo record output

L
R
REC (OUT)
Figure 6: Stereo record output
Two RCA jacks, labeled REC (OUT) (18) are available for connecting stereo
recording equipment. The allocation of the individual channels to the unbal-
anced stereo recording output can be configured as desired.
5.4.5

Serial control via RS232

RS232
Figure 7: Serial control
OUT R
81