GYS Energy 124 Mode D'emploi page 10

Translation of the original instructions
Connection / disconnection:
• Disconnect
• The terminal of the battery that is not connected
Only for
batteries
in-situ
• After the charging process, disconnect the
Connection:
• Class II device.
• This machine is fuse-protected.
Maintenance:
• If the power supply cable is damaged, it must
• Service should be performed by a qualified
• Warning! Always remove the power plug
• If the internal fuse is blown, it must be replaced
10
ENERGY 124, 126
connecting/disconnecting the device to/from
the battery.
to the car frame must be connected first. The
other connection must be made on the car
frame, far from the battery and the fuel line.
The battery charger must be connected to the
power supply network.
battery charger from the power supply
network and remove the connector from the
car frame and then the connector from the
battery, in this order.
be replaced by the manufacturer, its service
agent or an equally qualified person.
person.
from the wall socket before carrying out any
work on the device.
by the manufacturer, its after-sales service or
an equally qualified person.
the power supply before
EN