The Function Buttons On The Stand - Leica DMI3000B Mode D'emploi

7. Start-up

7.4 The Function Buttons on the Stand

Leica DMI3000 B:
• Focus wheels: the left-hand focus wheels can
be used for both coarse and fine focusing; the
right-hand focus wheel for fine focusing only
(a version of the Leica DMI3000 B with mir-
rored focus controls is also available)
• Light intensity: the transmitted light intensity
can be adjusted continuously from 0 to 12 V
using the potentiometer at the lower left of
the front of the microscope stand.
For the Leica DMI3000 B please continue at 7.6.
Illumination.
Leica DMI4000 B and Leica DMI6000 B:
A number of function buttons are located on
both sides of the stand. These can be broken
down into fixed and variable buttons. The vari-
able function buttons have different functions
depending on the features of the individual mi-
croscope.
Fixed function Buttons on the Left Side
The TL/IL button (84.1) toggles between the inci-
dent-light and transmitted light axis. The contrast
method last used with a given axis is restored
when switching.
The INT buttons (84.3) adjust the light intensity.
The adjustment can be made in coarse or fine
steps. Pressing both INT buttons at the same
time toggles between coarse and fine adjust-
ment.
The AP buttons (84.2) for the aperture
diaphragm and FD (84.4) for the field
diaphragm open and close their respective
diaphragms.
66
Note:
Changes to the light intensity as well as
aperture and field diaphragm settings are stored
for the individual objectives and contrast
methods.
Fig. 84 Fixed function buttons (left side of stand)
1 Toggle transmitted light/incident light
2 Aperture diaphragm
3 light intensity
4 field diaphragm
2
3
4
1