Using The Monitor; Using The Cursor Key - Aiwa XR-DV3M Mode D'emploi

TURNING ON/OFF THE ILLUMINATION
The unit has illumination lights around the function buttons and
the VOLUME control.
The illumination lights can be turned on in one of the three different
colors.
While the power is on, press ILLUMINATION repeatedly.
This turns on/off the illumination and changes its color in the
following order:
Illumination around the currently selected function button
1 Lights in blue
2 Lights in orange
3 Lights in purple
4 Turns off
Illumination around the other function buttons and the VOLUME
control
1 Lights in orange
2 Lights in purple
3 Lights in blue
4 Turns off
NOTE
Turning on/off the illumination lights is not possible during the demo
display or when the display brightness is set to "DIMMER 3" (page
10).
USING HEADPHONES
Connect headphones with a stereo mini plug (ø3.5 mm,
to PHONES.
No sound is heard from the speakers while the headphones are
plugged in.

USING THE MONITOR

This unit is equipped with a built-in monitor. The monitor allows
you to view pictures of DVDs and VCDs without connecting an
external TV set to the unit.
MONITOR
OPEN/CLOSE
OPENING THE MONITOR
Press MONITOR OPEN/CLOSE.
Alternatively, press i while pressing SHIFT on the remote control.
To close the monitor, press MONITOR OPEN/CLOSE again.
CHANGING THE ANGLE OF THE
MONITOR
Press i or k while pressing SHIFT on the remote control to
change the monitor angle, so that the best viewing angle is
obtained.
TURNING ON/OFF THE MONITOR
Press MONITOR ON/OFF to turn on or off the monitor.
1
/ inch)
8
• The monitor is automatically turned off when TUNER/BAND or
AUX is pressed.

USING THE CURSOR KEY

To use the CURSOR key as the ENTER button, press it as follows:
i/k
SHIFT
To use it as the cursor key (i/k/j/l), move the center knob to
the desired direction.
MONITOR
ON/OFF
MONITOR
OPEN/CLOSE
En
CURSOR
9
ENGLISH