Programmed Play (Vcd Only) - Aiwa XR-DV3M Mode D'emploi

PROGRAMMED PLAY (VCD
ONLY)
Up to 32 tracks can be programmed from the loaded disc.
To use this feature with VCDs that support PBC, turn off PBC first
(see "PLAYING A VCD WITHOUT USING PLAYBACK
CONTROL", page 20).
c
s
r,t
1 Press PRGM/RANDOM on the remote control once
in stop mode.
"PROGRAM" appears on the monitor screen and
"PRGM" flashes on the display.
2 Within 5 seconds, press ENTER.
The program screen is displayed on the monitor screen and
the display.
Monitor screen:
PROGRAM
SELECT TRACK EDIT PROGRAM
i UP
* *
* *
0 0
* *
* *
k DOWN
* *
* *
* *
* *
TOTAL TRACK
0 0
ENTER:MEMORY
CANCEL:CLEAR
3 Press the numbered button(s) or i/k on the
remote control to select the track to be played first.
Using the numbered buttons:
To select track 12, press +10, 2.
To select track 20, press +10, +10 and 0.
Using i/k:
Press i for a larger track number and k for a smaller track
number.
Monitor screen:
PROGRAM
SELECT TRACK EDIT PROGRAM
i UP * *
* *
1 0
* *
* *
k DOWN * *
* *
* *
* *
TOTAL TRACK
0 0
ENTER:MEMORY
CANCEL:CLEAR
24
ENGLISH
PRGM/
RANDOM
0-9,+10
C
i/k
ENTER
c/d
r,t
s
ik
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
TIME
0 : 0 0 : 0 0
PROGRAM:EXIT
c :PLAY
Display:
ik
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
* * * * * *
TIME
0 : 0 0 : 0 0
PROGRAM:EXIT
c :PLAY
4 Press ENTER.
The selected track number is listed in order on the monitor
screen, and lights up on the display.
The number of programmed tracks and the total playing time
are also indicated at the bottom of the monitor screen.
Total number of
programmed tracks
If you entered a wrong number
Press C.
The last programmed number is canceled. Then enter the
correct number.
5 Repeat steps 3 and 4 to program other tracks.
6 Press c to start play.
To cancel programmed play
Press PRGM/RANDOM twice.
"OFF" is displayed on the monitor screen. Programmed play is
canceled, and the unit continues to play the current and all
succeeding tracks in the disc.
To stop programmed play
Press s.
The unit remembers the point at which play stopped, and resumes
programmed play from this point when c is pressed.
To clear the point to be resumed
Press s once again after stopping programmed play.
The resume memory is cleared, and plays from the first
programmed track when c is pressed.
To clear the program
Press s twice after stopping programmed play.
The program will also be cleared when the disc door is opened,
the function is changed, and the unit is turned off.
To continue programming a new set of tracks, press ENTER and
repeat from step 3.
To check the program
Call up the program screen on the monitor screen.
To close the program screen, press PRGM/RANDOM twice.
Alternatively, press t in stop mode.
With each press, the program number and the track number are
shown progressively on the display.
To add a track to the program
Before playing, repeat steps 1 to 4. The track will be programmed
after the last track.
To delete a track from the program
1 Press PRGM/RANDOM repeatedly so that "PROGRAM"
appears on the monitor screen. Then press ENTER within 5
seconds.
2 Press C.
The last track in the program is deleted.
Total playing time of
programmed tracks