Connections - Aiwa XR-DV3M Mode D'emploi

CONNECTIONS

Check your accessories
Remote control AM loop antenna
Operating Instructions, etc.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment first.
Finally, connect the AC cord.
• There are no differences between the two speaker units. Both
speakers can be connected as L (left) or R (right).
6
ENGLISH
1 Connect the speaker cords to the speakers.
2 Connect the speaker cords to the main unit.
FM antenna
3 Connect the supplied antennas.
Connect the cords with the white stripes to ) terminals and
the other cords to ( terminals.
The cords with the white stripes should be connected to the 0
terminals and the other cords to the 9 terminals.
Connect the FM antenna to the FM 75 Ω terminals and the AM
antenna to the AM LOOP terminals.
FM antenna
AM antenna