Troubleshooting - Altec Lansing M202 Guide D'utilisation

Symptom Possible Problem
AC adapter isn't plugged into a wall outlet or the
connector isn't plugged into the power supply jack on
the back of the speaker system.
Speaker system
doesn't respond
Wall outlet is not functioning.
(no power)
The power isn't turned on.
The wrong adapter for iPhone or iPod is being used,
or no adapter.
iPhone or
iPod doesn't
iPhone or iPod didn't install properly.
dock properly
Solution
Plug the AC adapter into a wall outlet and plug the connector into the power
supply jack on the back of the speaker system.
Plug another device into the same outlet to confirm the outlet is working.
Turn on the speaker system by pressing the
lights up.
Make sure the adapter is the proper one for your iPhone or iPod.
Remove your iPhone or iPod from the dock and check for obstructions
on the connectors in the dock and on your iPhone or iPod. Then reseat it
in the dock.

Troubleshooting

button. The "Power" LED
13