Technical Specifications - Selco Neomig 3000 Manuel D'instructions

8 TECHNICAL SPECIFICATIONS

Power supply voltage (50/60 Hz)
*
Zmax (@PCC)
Delayed line fuse
Maximum power absorbed
Power factor
MIG welding current (40°c)
(x=30%)
(x=60%)
(x=100%)
Adjustment range
Loadless voltage
Gearmotor power
Wire diameter
Wire feed speed
Wire feed button
Gas bleed button
Synergy
Steel rollers
Protection rating
Insulation class
Construction standards
Dimensions (lxdxh)
Weight
Power supply cable
NEOMIG 3000
*
This equipment complies with EN/IEC 61000-3-11.
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
NEOMIG 4000
*
This equipment complies with EN/IEC 61000-3-11 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
26
NEOMIG 3000
3x230/400Vac -20+10%
260m
25A @ 230Vac/16A @ 400Vac
13.8 KVA-13.2 kW
0.96
300A
230A
180A
30-320A
2x10 pos.
42Vdc
120W
0.6-2.4 mm
0-18 m/min
yes
yes
(N 3000 XP)
yes
IP21S
H
EN 60974-1
EN 60974-5
EN 60974-10
50x98x76 cm
88 Kg.
4x2.5 mmq
NEOMIG 4000
3x230/400Vac -20+10%
198m
40A @ 230Vac/25A @ 400Vac
22.2 KVA-21.3 kW
0.96
400A
320A
250A
30-420A
3x10 pos.
50Vdc
120W
0.6-2.4 mm
0-18 m/min
yes
yes
(N 4000 XP)
yes
IP21S
H
EN 60974-1
EN 60974-5
EN 60974-10
50x98x76 cm
107 Kg.
4x4 mmq