Heating Specifications; Stirring Speed Specifications - Thermo Scientific Cimarec+ Mode D'emploi

Table des Matières

Publicité

G
S
ENERAL
PECIFICATIONS

Heating Specifications*

Top Plate Surface - Solid Ceramic
Models
Temperature range
Heat-up time to maximum temperature (unloaded top
plate)
Accuracy of the temperature display vs. the actual
average temperature of a 2" diameter of setting area at
the center of the top plate (setpoint 100°C unloaded)
Temperature stability at the center of the top plate
surface (@ 100°C unloaded)
Typical accuracy of remote probe at user selected
calibration temperature after calibration procedure
Temperature stability using remote probe (500 ml of
water in a 1000 ml flask at 70°C)
Top Plate Surface - Solid Aluminum
Models
Temperature range
Heat-up time to maximum temperature (unloaded top
plate)
Accuracy of the temperature display vs. the actual
average temperature of a 2" diameter of setting area at
the center of the top plate (setpoint 100°C unloaded).
Temperature stability at the center of the top plate
surface (@ 100°C unloaded)
Typical accuracy of remote probe at user selected
calibration temperature after calibration procedure
Temperature stability using remote probe (500ml of
water in a 1000 ml flask at 70°C)

Stirring Speed Specifications

Speed Range 50 to 1500 RPM(Maximum speed is dependent on the viscosity of the solution).
Stability of the stirring speed setpoint (600 ml of water in a 1000 ml glass flask) ± 5.0% at 1000 RPM
Top Plate Size
4" x 4"
7" x 7"
10" x 10"
* The specification defined in this section is derived from testing data statistics of Thermo Fisher Scientific lab. We
reserve the right to make changes in design and specification without prior notice.
** As the top plate becomes dirty, the maximum temperature will decrease. To return the unit to its maximum
temperature performance, use a mild abrasive to remove stained areas.
20
Max Recommended Flask Size
1 liter
4 liters
6 liters
4" x 4"
7" x 7"
30°C - 540°C (86°F - 1004°F)** 30°C - 400°C (86°F - 752°F)**
30°C - 300°C (86°F - 572°F)**
10" x 10"
8 minutes
± 5.0°C
± 2.0°C
±1.8°C
±0.5°C
7" x 7"
10 minutes
± 10.0°C
± 2.0°C
± 1.8°C
± 0.5°C
Max Weight on Top Plate
15 lbs
25 lbs
35 lbs

Publicité

Table des Matières
loading

Table des Matières