Storage; Complete Tool Equipment; Operations And Warranty Conditions; Operation Conditions - Stanley Masterfix XGRIP N09QI Mode D'emploi

5. STO RAGE
The pneumatic-hydraulic tool embedded in a shipping container must be stored in environment with relative
humidity to 70% and temperature ranging from +5
and caustics.

6. COMPLETE TOOL EQUIPMENT

Replaceable anvils and mandrels located in a plastic bag, Operations manual, Certifi cate of warranty.

7. OPERATIONS AND WARRANTY CONDITIONS

7.1 OPERATION CONDITIONS

For reliable function of the tool we recommend to use treated compressed air. Treated compressed air means
compressed atmospheric air bare of solid particles and water, reduced to required pressure and lubricated with
anti-corrosive oil. Immediately before putting the tool into service, the regulator valve must not exceed the
maximum outlet pressure of 0,7 MPa. It is recommended to fi t the air line with an air fi lter and lubricator.
Equivalent sound-pressure level of noise A, L
protectors during continuous and long-term operation.
Aggregated weighted vibration acceleration level L
eff ective value of the vibration acceleration a
The trigger enables safe control of the tool with a force max. 35 N < 50 N without releasing the grip-handle
according to the health regulation.

7.2. WARRANTY CONDITIONS

For reliable and safe function of the tool it is necessary to adhere to instructions and principles stated above.
For the warranty period the customer must not perform any alterations other than those permitted by the
manufacturer, see paragraph 2.1, 3.1, 3.2. Other non-detachable parts are secured with paint. In case of
neglecting this protection the manufacturer shall not admit possible warranty repairs. To admit warranty repair
the customer must submit confi rmed warranty certifi cate of the tool, Certifi cate of quality and completeness
or proof of purchase. The warranty period is 24 months from the day of purchase confi rmed in the Warranty
certifi cate if the purchase contract does not state otherwise.
Warranty is valid provided that the following:
• General safety instruction and principles (paragraph 1)
• Tool operation (paragraph 2.4)
• Daily and weekly maintenance (paragraph 3.1 and 3.2)
• Storage (paragraph 5)
• Operations and waranty conditions (paragraph 7)
Warranty does not apply to quickly expendable parts (see paragraph 4.2.)
o o
C to +40 C, without aggressive evaporation of salts, acids
does not exceed 68,6 dB(A), still it is recommended to use ear
pAeq,T
= 113,8 dB re 10
avw,T
-2
= 0,49 m.s .
vw,T
-6 -2
m.s . The cumulative weighted
E N G L I S H
9