Angelcare AC620 Manuel De L'utilisateur page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TO ACTIVATE THIS FUNCTION:
Press and hold the Nursery Unit
Out-of-Range function button for 2 seconds.
The Out-of-Range Indicator (orange)
on both units will light up to display
function's activation.
OUT-OF-RANGE ALARM
Alarm activates when your two units are not communicating.
The Parent Unit will emit a double beep every 8 seconds.
Out-of-Range Indicator will flash on both units.
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF
the Out-of-Range Alarm will sound. Turn the Nursery Unit ON again and reactivate
the function. If the Parent Unit is turned OFF, the Out-of-Range function
will reactivate.
TO STOP THE OUT-OF-RANGE ALARM:
Turn the Parent
Unit OFF
4.2 - SOUND
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 3 meters apart.
TO ADJUST SOUND LEVEL:
Slide Parent Unit Volume/Power button
upward or downward.
12
All manuals and user guides at all-guides.com
OR
IF YOU HEAR NO SOUND:
• Check that both units are powered on.
• Check that both units are plug into
• Check the batteries in both units
• Bring the Parent Unit closer to the
Turn the Nursery
Unit ON
functioning electrical outlets.
(replace or recharge them if necessary)
Nursery Unit.

Publicité

Table des Matières
loading

Table des Matières