PIX output menu indications
PIX output setting menu indications
When the SET UP button is pressed so that it lights, setting menu indications are output via the PIX output connector.
The setting menus consist of main menus and submenus. Setting menus are displays one page at a time. All of the
setting menu screens and their structure are shown in the diagram below.
The MAIN MENU consists of two screens, 1/2 and 2/2. These screens are used to open the submenus.
To open a submenu, select it by turning the SET UP dial and then press the SET UP dial.
To return to the MAIN MENU from a submenu, turn the SET UP dial to align the arrow cursor with the desired menu
title, then press the SET UP dial.
For details on the submenu items, refer to the Instruction Manual of the camera recorder used.
Structure of setting menus
MAIN MENUS
MAIN MENU 1/2
MAIN MENU 2/2
SUB MENUS
1 SYNCHRO SCAN
2 VR DATA
3 MATRIX
4 DTL SETTING
5 ADDITIONAL DTL
6 SKIN TONE DTL
7 KNEE / LEVEL
8 FLARE / GAMMA
9 GENLOCK / IRIS
: CAMERA SW MODE
; CAMERA SETTING
< AUTO SHADING
= DIAGNOSTIC
- 9 -