Panasonic DVCPRO AJ-BS900P Mode D'emploi page 21

Specifications
Intercom
Microphone selection:
I/O level:
Format:
Lines:
S/N ratio:
Distortion:
Frequency range:
Dynamic range:
Analog video input signals
GEN LOCK input signal:
RET1, RET2 input signals:
Prompt input signal:
Tally
Input:
Output:
Sync signal
Standard:
Horizontal phase adjustment range:
SC lock range:
SC variable range:
Input connectors
GEN LOCK input:
RET1, RET2:
Prompt input signal:
Tally input:
Communication:
RCOP input:
CSU input:
AC input:
Output connectors
ENC output:
Communication output:
PIX output:
WFM output:
Audio output:
Tally output:
WFM control output:
Digital component output, 2-lines:
Switchable between dynamic microphone and carbon microphone
4-line/2-line:
RTS:
PGM:
Selectable between 4-line, 2-line, and RTS
Base station to camera:
Camera to base station:
50 dB or more (base station to camera) (camera to base station)
0.3% or less
100 Hz - 12 kHz (± 3 dB) (camera to base station)
100 Hz - 5.5 kHz (± 3 dB) (base station to camera)
12 dB
, 75 Ω, positive polarity
VBS: 1 V
P-P
, 75 Ω, positive polarity
BBS: 0 45 V
P-P
, 75 Ω, positive polarity
VBS: 1 V
P-P
, 75 Ω, positive polarity
VBS: 1 V
P-P
DC 12 V voltage supply, switchable contacts
Open collector type, maximum input current 10 mA, voltage DC 12 V
RS-170A
± 2 µS
3.579545 MHz ± 20 Hz
360°
BNC, 75 Ω, bridged
BNC, 75 Ω, bridged
BNC, 75 Ω, bridged
5-pin (balanced)
24-pin
10-pin (balanced)
10-pin (balanced)
3-pin
3 lines, BNC, 75 Ω
1 line, BNC, 75 Ω
1 line, BNC, 75 Ω
1 line, BNC, 75 Ω
2 lines, XLR 3-pin, 600 Ω (balanced)
5-pin, open collector (low during tally input)
7-pin
BNC, 75 Ω (activated when optional AJ-YA901 unit is installed)
- 20 -
0 dBm (600 Ω, balanced)
(200 Ω)
1 V
P-P
0 dB (600 Ω, balanced)
2 lines (ENG, PGM)
1 line (ENG)