Monitoring The Recording Condition; Checking The Used Time - Sony SVT-LC300 Mode D'emploi

Recording
Monitoring the Recording
Condition
You can check the recording condition by pressing
PLAY/REC CHECK while recording in time lapse
mode.
Press PLAY/REC CHECK while recording.
After the tape is rewound for about three seconds and
played back for about two seconds, the unit returns to
the original recording mode.
Note
While monitoring the recording condition, recording is
interrupted.
20
PLAY/REC CHECK

Checking the Used Time

1
1
Turn on the power of the equipment to be used.
2
Press MENU until the USED TIME display
appears on the screen.
VIDEO: amount of time the video head has been
used
POWER: the amount of time the power has been
on.
2H Y
<USED TIME>
VIDEO 00000H
POWER 00000H
3
Press PAUSE/SEARCH to return to the normal
display.
2 3