Changing/Cancelling The Timer Settings - Sony SVT-LC300 Mode D'emploi

Timer Recording
7
Insert the cassette.
8
Press TIMER REC.
The VCR turns off automatically, and enters the
timer recording standby mode. The
appears in the display window.
When no cassette is inserted, the
flashes and a beep sounds.
When the input signal from the EXT TIMER IN
terminal becomes low, recording starts and the E
indicator appears in the display window.
When the input signal from the EXT TIMER IN
terminal becomes high, recording stops and the VCR
enters the timer recording standby mode.
Input signal from the EXT TIMER IN terminal
Recording starts.
26
When
indicator
TIMER REC to clear it.
indicator
Changing the timer settings
1
2
3
4
5 V
Cancelling the timer setting
1
0 V
2
Recording stops.
3
4
5
Cancelling all timer settings
1
2
3
Changing/Cancelling the Timer
Settings
indicator lights in the display window, press
Press MENU until the TIMER SET display
appears on the screen.
Press SHIFT b or v to move the flashing to the
position where you want to change.
Press DATA '/' to change the setting.
Press PAUSE/SEARCH to return to the normal
display.
Press MENU until the TIMER SET display
appears on the screen.
Press SHIFT v to move the flashing to the position
where you want to cancel.
Press SHIFT b to move the flashing to the timer
execution.
Press DATA '/' to set the timer execution to N.
Press PAUSE/SEARCH to return to the normal
display.
Press MENU until the TIMER SET display
appears on the screen.
Press MENU RESET.
All timer settings are cleared.
Press PAUSE/SEARCH to return to the normal
display.