Searching The Time And Date - Time/Date Search - Sony SVT-LC300 Mode D'emploi

Searching the Time and Date — Time/Date Search
1
1
Turn on the power of the equipment to be used.
2
Set ON-SCREEN to ON.
3
Press PAUSE/SEARCH three times in stop mode.
The T/D (time/date) search indicator flashes in the
display window and on the monitor screen.
Date
Hour
In the display window
4
Press DATA '/' to set the date and press
SHIFT b to move the flashing to the hour.
Press ' or ' to set the hour.
5
Press FF ) or REW 0.
The cassette stops at the portion when you set the
time and date and the still picture playback is
displayed.
The time/date search mode is automatically
cleared.
Notes
• The time/date function works in 18 to 96-hour mode
using a T-120 tape and in 24 to 126-hour mode usitng
a T-160 tape.
• If the tape is reached at its end during searching, the
tape is rewound and the unit enters the stop mode at
the beginning of the tape.
32
4 5 2 3
1 H 1 2 M 0 6 S
T / D S E A R C H
– 0 1 – 1 2
Hour
Date
On the monitor