Searching The Picture Of The Alarm Recordings - Alarm Search - Sony SVT-LC300 Mode D'emploi

Indicators during alarm recording
The AL indicator flashes in the display window.
The count (left digit) of the alarm recording flashes on
the monitor screen.
The alarm recording can be counted up to 999.
When the alarm function has worked 1000 times, the
count number returns to 000.
0 4 - 1 5 - 9 8 W E D 0 0 1
0 4 : 1 5 : 4 3 6
To Reset the Alarm Count
1
1
Press MENU until the ALARM TIME display
appears on the screen.
2
Press MENU RESET with a pointed material.
Alarm count number
2
Searching the Picture of the Alarm
Recordings — Alarm Search
1 4
Rewind 0
3 2 1 Present
positin
1
Turn on the power of the equipment to be used.
2
Set ON-SCREEN to ON.
3
Press PAUSE/SEARCH in stop mode.
The alarm search indicator flashes in the display
window and on the screen.
In the display window
4
Press DATA '/' to set the alarm search number
(1 to 99).
5
Press FF ) or REW 0.
The cassette stops at the portion where the alarm
function worked and the still picture playback is
displayed.
The alarm search mode is automatically cleared.
Note
If the tape is reached the end during searching, the tape
is rewound and the unit enters the stop mode at the
beginning of the tape.
5 2 3
Fast-forward )
1 2 3
1 H 1 2 M 0 6 S
A L S E A R C H 0 1
On the monitor
29