Standard Operation - Heating Mode - Friedrich D36YJ Manuel D'utilisation

Standard Operation - Heating Mode

FAN FAN
SPEED SPEED
TEMP TEMP
What is the three-minute delay function?
It will take time for the product to blow warm air. The delay is to protect the compressor.
The room will be heated with warm air after three minutes when the compressor begins
operation.
1 1
2 2
OPER OPER
MODE MODE
3 3
4 4
If you want to set the heating operation, If you want to set the heating operation,
press the press the button. And press the button. And press the
button. button.
Set the desired room temperature higher Set the desired room temperature higher
than the current room temperature. than the current room temperature.
A click of the button will increase the A click of the button will increase the
desired temperature by 2°F or 1°C. desired temperature by 2°F or 1°C.
TEMP TEMP
A click of the button will decrease the A click of the button will decrease the
desired temperature by 2°F or 1°C. desired temperature by 2°F or 1°C.
- Setting temp range : 60°F~86°F(16°C~30°C) - Setting temp range : 60°F~86°F(16°C~30°C)
- If the desired temperature is set lower than - If the desired temperature is set lower than
the current room temperature, the heating the current room temperature, the heating
function will not begin. function will not begin.
If you prees the mode button during the If you prees the mode button during the
operation, the operation mode will be operation, the operation mode will be
changed in the order of cooling, changed in the order of cooling,
dry(dehumidification),heating,auto-operation dry(dehumidification),heating,auto-operation
and fan operation. and fan operation.
If you press the If you press the button, the cooling button, the cooling
operation will stop. operation will stop.
Operating Introductions
OPER OPER
MODE MODE
Owner's Manual 9