Setting The Duration Of The Menu Display; Setting The Colour Temperature; Setting The Image Format - Renkforce RF-PJ-300 Notice D'emploi

e) Setting the duration of the menu display
Use this option to set how long the menu is displayed for when you press the OK button. The
menu then switches off automatically.
• Use the buttons to select the display duration of the OSD menu.
• Use the buttons to change the setting. The following options are available:
- 5 seconds
- 10 seconds
- 15 seconds
- Off
f) Setting the colour temperature
• Use the buttons to select the colour temperature adjustment option. Confirm your
selection with the OK button.
• Use the buttons to select menu items.
• Use the buttons to adjust a colour component setting. The following values can be
selected:
- Red (0 - 100)
- Green (0 - 100)
- Blue (0 - 100)
• Confirm your setting with the Menu
g) Setting the image format
• Press the OK button to select the image format for the projection image.
• Use the buttons to change the image format. The following options are available:
- Automatic
- 4 : 3
- 16 : 9
• Confirm your setting with the Menu
24
button, or press the ESC button to cancel.
button, or press the ESC button to cancel.