Configuring The Noise Reduction Settings; Screen (Vga Settings); Changing The Projection Size - Renkforce RF-PJ-300 Notice D'emploi

h) Configuring the noise reduction settings
• Use the buttons to select the noise reduction option. Confirm your selection with the OK
button.
• Use the buttons to change the noise reduction setting. The following options are available:
- Off
- Low
- Medium
- High
- Default
• Confirm your setting with the Menu
i) Screen (VGA settings)
Set the display options for the VGA image signal. VGA must be selected as the video signal
source.
• Use the buttons to select the "Screen" setting from the menu. Confirm your selection
with the OK button.
• Press the buttons to set
- Automatic positioning
- Horizontal position (0 - 100)
- Vertical position (0 - 100)
- Size (0 - 100)
- Phase of the displayed image (0 - 100)
• Adjust the parameter with the
• Confirm your settings with the Menu button or cancel with the ESC key.
j) Changing the projection size
• Use the buttons to select the projection size option, and then confirm your selection with
the OK button.
• Use the buttons to adjust the projection size in percent.
• Confirm your settings with the Menu button or cancel with the ESC key.
button, or press the ESC button to cancel.
buttons.
25