Setting The Menu Language; Audio Settings; Configuring The Image Mode - Renkforce RF-PJ-300 Notice D'emploi

b) Setting the menu language
• Use the and
Confirm your selection with the OK button (10).
• Use the and
• Press the menu
to cancel.
c) Audio settings
• Press the OK button to select the audio settings option.
• Use the buttons to select the parameters you want to configure.
• Use the buttons to change a setting.
- Treble and bass (adjustable between 0 - 100).
- Balance
- Switch off automatic volume adjustment
• Confirm your setting with the Menu
d) Configuring the image mode
Set the different display parameters of the image as follows:
• Use the buttons to select the parameters you want to configure.
• Use the buttons to adjust a setting. Change the following image parameters according
to your needs:
- Contrast (0 - 100)
- Brightness (0 - 100)
- Colour (0 - 100)
- Sharpness (0 - 100)
- Tint (0 - 100)
• Confirm each setting with the Menu
buttons to navigate through the menu. Select the language setting option.
buttons to select the desired language.
button to confirm your selection and exit the menu. Press the ESC button
button, or press the ESC button to cancel.
button, or press the ESC button to cancel.
23