Troubleshooting Guide - Hatco TPT-230-4 Série Manuel D'installation Et D'utilisation

Masquer les pouces Voir aussi pour TPT-230-4 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
WARNING
To avoid any injury or damage the toaster must only be
serviced by qualified personnel.
SYMPTOM
Toast too light.
Toast too dark.
Unit takes too long to toast.
Unit toasts only on one side.
Toaster does not automatically pop-
up.
Heating Element does not come on
at all when handle is pushed down.
The handle does not latch.
Toaster trips the circuit breaker or
GFCI.
To avoid any injury, unplug the toaster from the power
source and allow to cool completely before performing
any maintenance, cleaning, or attempting to clear a jam.
PROBABLE CAUSE
Color Selection Control set on a light
setting.
Supply voltage to unit is low.
Color Selection Control set on a dark
setting.
Supply voltage to unit is high.
The first few batches can take longer
because the toaster needs time to
heat up when initially turned on.
Heating element defective.
Spring is broken.
Unlatching solenoid is no longer
working.
Control board has stopped working.
The switch may be broken.
Latch mechanism is broken.
Circuit breaker is not properly sized
for the toaster.
Wiring fault inside toaster.
7

TROUBLESHOOTING GUIDE

WARNING
CORRECTIVE ACTION
Adjust color control to a darker setting.
Verify the supply voltage to the toaster matches
the unit specifications.
Adjust color control to a lighter setting.
Verify the supply voltage to the toaster matches
the unit specifications.
Allow toaster to heat up before inserting bread
product.
Visually check heating elements inside toaster
with the latch engaged. With the handle pushed
down, the heating element should glow red. If
the element does not glow do the following:
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Check circuit breaker for proper sizing.
Contact Local Hatco Dealer or the Hatco
Service Team for assistance.
Form No. TPT2304CEM-1107

Publicité

Table des Matières
loading

Table des Matières