Troubleshooting Guide; Corrective Action - Hatco TPT-120 Manuel D'installation Et D'utilisation

English
WARNING
Unit must be serviced by qualified personnel only. Service
by unqualified personnel may lead to electric shock or
burn.
Symptom
Toast too light.
Toast too dark.
Unit takes too long to toast.
Unit toasts on one side only.
Heating element does not come on
at all when the operating lever is
pushed down.
The operating lever does not latch.
Toaster trips the circuit breaker or
GFCI.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco
for assistance. To locate the nearest Service Agency, log onto the Hatco website at www.hatcocorp.com and click on
Find Service Agent, or contact the Hatco Parts and Service Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: partsandservice@hatcocorp.com
Form No. TPTM-0817
Probable Cause
COLOR CONTROL knob set on a light setting.
Supply voltage to unit is low.
COLOR CONTROL knob set on a dark setting.
Supply voltage to unit is high.
The first few batches can take longer because
the toaster needs time to heat up when initially
turned on.
Supply voltage to unit is low.
TOAST/BAGEL button is in the BAGEL position
(one-sided toasting).
Heating element defective.
The switch may be broken.
Latch mechanism is broken.
Circuit breaker is not sized properly for the
toaster.
NOTE: TPT Series toasters require a dedicated
circuit.
Wiring fault inside toaster.

TROUBLESHOOTING GUIDE

ELECTRIC SHOCK HAZARD: Unplug power cord and allow
unit to cool before performing cleaning, adjustments,
maintenance, or attempting to clear a jam.
Turn COLOR CONTROL knob to a darker setting.
Verify the supply voltage to the toaster matches the
unit specifications.
Turn COLOR CONTROL knob to a lighter setting.
Verify the supply voltage to the toaster matches the
unit specifications.
Push down the operation lever(s) for a toasting cycle
before inserting bread product to allow the toaster
to heat up.
Verify the supply voltage to the toaster matches the
unit specifications.
Push the TOAST/BAGEL button to set it to the
TOAST position (two-sided toasting).
Visually check the heating element inside the toaster
with the operation lever engaged. With the lever
pushed down, the heating element should glow red.
If the element does not glow, Contact Authorized
Service Agent or Hatco for assistance.
Contact Hatco for assistance.
Contact Hatco for assistance.
Check circuit breaker for proper sizing.
Contact Hatco for assistance.
9
WARNING

Corrective Action