Commissioning And Maintenance; Releasing The Transducer; Dimensional Drawing; Instruments Admissions - Camille Bauer SINEAX P530 Mode D'emploi

Convertisseur de mesure pour puissances active ou réactive
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Output
Test and
Output signal
conformity marks
15
16
17 18
+
–20...20mA
Ord: 123 / 123456 / 123 / 123
SINEAX P530
133.33V 5A 50Hz –2000...2000kW (440kV/133.33V 2500A/5A)
1
2
3
4
5
6
7
Measuring Input
Input voltage
Input current
Nominal frequency
Measuring range
Measured quantity
The figures in brackets are the
ratios of the main v.t's and c.t's
Fig. 5. Declaration to type label.

6. Commissioning and maintenance

Switch on the power supply and the measuring input. It is
possible during the operation to disconnect the output line and
to connect a check instrument, e.g. for a functional test.
No maintenance is required.

7. Releasing the transducer

Release the transducer from a top-hat rail as shown in
Fig. 6.
Fig. 6
14
Calibration seal
Camille Bauer AG
5,6
0,5
Switzerland
85-230V AC/DC
40-400Hz 4.5VA
+
8
9
10
11
12
13
14
Power supply

8. Dimensional drawing

112.5
Works No.
114.1
Fig. 7. Housing P18/105 clipped onto a top-hat rail (35 ×15 mm or
35×7.5 mm, acc. to EN 50 022)

9. Instruments admissions

FCC Compliance and Canadian DOC Statement
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
both part 15 of the FCC Rules and the radio interference
regulations of the Canadian Department of Communi-
cations: These limits are designed to provide reasona-
ble protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is like to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
15
16
17 18
1
2
3
4
Germanischer Lloyd
Type approval certifi cate: 12 260-98 HH
CSA approved for USA and Canada
fi le-nr. 204767
5
6
7
8
9
10
11
12
13
14
105

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sineax q531

Table des Matières