Construction Features; Materials Of Construction; Specifications & Technical Data - Carlisle TEKNA BASECAOT Mode D'emploi

Construction Features

1 Air Cap (nickel plated brass for long durability)
2 Air Cap Retaining Ring (allows easy rotation of air cap)
3 Fluid Nozzle (not visible, ideal for automotive topcoat systems)
4 Fluid Needle (not visible)
5 Fluid Inlet (3/8 BSP thread – accepts TEKNA & DeVilbiss cups)
6 Air Inlet (universal thread, accepts G 1/4 & 1/4 NPS)
7 Self Adjusting Needle Packing (packing not visible, for long packing life)
8 Trigger (ergonomic for comfort)
9 Trigger Stud & Screw (easy replacement design)
10 Fan Air Adjustment (stepless regulation for flat to round spray)
11 Fluid Adjustment (stepless regulation of fluid volume)
12 Removable Air Separator (not visible, for long gun service life)
13 Interchangeable Colour ID System (4 coloured rings supplied)
14 Forged gun body (ergonomic, good looking & durable, easy to clean)
15 900cc Aluminium Cup (easy clean) (shown) or 20 oz. Acetal Cup (waterbourne) (not shown)
16 Push On Lid w/Drip Free Vent (disposable/easy clean design) (aluminum cup) or screw-on lid w/vent (acetal Cup)
17 Air Valve (design offers low pull force & low pressure drop)
Gun acceptable for waterborne and solvent borne applications

Materials of Construction

Gun Body
Air Cap
Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud
Air Separator, Air Cap Retaining Ring, Knobs
Springs, Clips, Screws
Seals, Gaskets
Trigger
Handle Plug, Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut
Air Valve Assembly
Specifications & Technical Data
Air Supply Connection
Maximum Static Air Inlet Pressure
Nominal Gun Air Inlet Pressure for HVLP Model (with gun triggered)
Air Consumption
Fluid Supply Connection
Service Temperature
Gun Weight (gun only)
TB-1018-R1 (2/2018)
3, 4, 12
5
2
1
7
8
17
5 / 16
16
15
9
10
11
14
13
6
Anodized aluminium
Nickel plated brass
Stainless steel
Anodized aluminium
Stainless steel
Solvent resistant
Chrome plated steel
Chrome plated brass
Stainless steel, acetal
Universal 1/4" BSP and 1/4" NPS
P1 = 12 bar (175 psi)
1.6 bar (24 psi)
See Chart 1 on page 11
3/8" BSP
0 to 40°C (32 to 100°F)
478g (16.9 oz.)
EN
www.carlisleft.com