Welch Allyn 719 Serie Mode D'emploi page 13

Directions for use
Battery replacement
Remove the battery section
1. Hold the instrument handle firmly by the battery section.
2. Turn the rheostat section counterclockwise until it detaches from the battery
section.
Replace a new battery section
1. Insert the rheostat section into the new battery section.
2. To connect the two sections, turn the rheostat section clockwise until tight.
3. Ensure that the rheostat section is secure on the battery section of the instrument
handle.
Device disposal
This product and its accessories must be disposed of according to local laws and
regulations. Do not dispose of this product as unsorted municipal waste. Prepare this
product for reuse or separate collection as specified by Directive 2002/96/EC of the
European Parliament and the Council of the European Union on Waste Electronic and
Electrical Equipment (WEEE). If this product is contaminated, this directive does not
apply.
Service and support
Service
If the product fails to function properly or if assistance, service, or spare parts are
required, contact the nearest Welch Allyn Technical Support Center.
Support
http://www.welchallyn.com/about/company/locations.htm
Appendices
Specifications
Warning: No modification of this equipment is allowed.
A - English 7