MINN KOTA MKA-32 Guide Rapide page 5

Installing the Top Plate to a DeckHand 40
1
ITEM(S) NEEDED
a. Position the DeckHand 40 Davit and Base over
the Top Plate Assembly (Item #A) and mount the
Bracket using only the four holes that are farthest
Outboard. The two holes closest inboard are not
used to install the Bracket.
b. Use four 1/4" x 5/8" Screws (Item #18) to fasten
the Top Plate to the Bracket. The screws should be
inserted down through the DeckHand 40 and into the
Bracket.
Installing the Top Plate to a Pontoon Hand Control Bracket
1
ITEM(S) NEEDED
a. Position the Pontoon Hand Control Bracket over
the Top Plate Assembly (Item #A) and mount the
Bracket using only the four holes that are farthest
Outboard. The two holes closest inboard are not
used to install the Bracket.
b. Use four 1/4" x 5/8" Screws (Item #18) to fasten
the Top Plate to the Bracket. The screws should be
inserted down through the Pontoon Hand Control
Bracket and into the Quick Release Bracket.
5 | minnkotamotors.com
#18 x 4
#A x 1
1a
Mounting Mounting
Holes Holes
Inboard Inboard
#18 x 4
#A x 1
1a
Mounting Mounting
Holes Holes
Inboard Inboard
1b
Outboard Outboard
DeckHand 40 DeckHand 40
Base and Davit Base and Davit
Top Top
Plate Plate
Outboard Outboard
1b
Outboard Outboard
Stainless Stainless
Steel Screw Steel Screw
Pontoon Pontoon
Hand Control Hand Control
Bracket Bracket
Top Plate Top Plate
©2020 Johnson Outdoors Marine Electronics, Inc.
Stainless Stainless
Steel Screw Steel Screw
Inboard Inboard
Outboard Outboard
Inboard Inboard