MINN KOTA MKA-32 Guide Rapide page 3

INSTALLATION
Opening the Bracket
1
ITEM(S) NEEDED
a. Remove the Pin and swing open the Cam Lever.
b. Remove the Top Plate Assembly (Assembly #A)
from the Bottom Plate Assembly (Assembly #B) by
sliding the Top Plate away from the Cam Lever.
1b
Top Plate Top Plate
Assembly Assembly
Installing the Top Plate to a PowerDrive or Terrova
1
WARNING
Make sure that the Power Cables from the battery are
disconnected, or that the breaker, if equipped, is "off."
NOTICE:
A motor may weigh up to 65lbs. We recommend
having a second person help with the installation.
a. Place the mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
motor should be in the stowed position.
3 | minnkotamotors.com
#A x 1
Bottom Plate Bottom Plate
Pin Pin
Assembly Assembly
1a
Pin Pin
Cam Lever Cam Lever
Power Cables Power Cables
Deployed Deployed
#B x 1
Top Plate Top Plate
Assembly Assembly
Bottom Plate Bottom Plate
Assembly Assembly
Stowed Stowed
©2020 Johnson Outdoors Marine Electronics, Inc.