Lumie Bodyclock GO 75 Guide D'utilisation page 2

 English
All manuals and user guides at all-guides.com
Important!
If the product is damaged please contact us before use.
Do not use Bodyclock Go if the lamp cover is broken, damaged or missing. If you
need to remove the lamp cover, unplug the unit first and let it cool down.
The lamp cover gets warm when the light is on, so keep
the unit clear of anything that may be damaged by heat.
Do not open the base – there are no user-serviceable parts inside.
For indoor use only.
Keep away from water and damp.
Clean only with a dry or lightly moistened cloth.
Always use the correct bulb (maximum 4W E14 halogen bulb). Replacements are
available from Lumie.
This product conforms to the electromagnetic compatibility standard for medical
devices and is unlikely to cause interference affecting other electrical and electronic
products in its vicinity. However, radio transmitting equipment, mobile phones and
other electrical/electronic equipment can interfere with this product; if this happens
simply move the product away from the source of interference.
Keep the cable away from heated surfaces. If the cable is damaged it must be
replaced by Lumie, a Lumie distributor or suitably qualified person in order to
avoid a hazard.
At the end of its life, do not throw the unit out with normal domestic waste.
Please take it to an official recycling point to be disposed of responsibly.
Serial number
SN
European Declaration of
Conformity:
Class I Medical Device
Manufacturer: Lumie,
3 The Links, Bar Hill,
Cambridge, CB23 8UD, UK.
Keep dry
For indoor use only
Do not place in household
waste. Dispose of at a
recycling centre.
Read instructions for use
Caution
Caution – hot surface
Important!
Fuse
Double-insulated
(Class II electrical)
AC (alternating current)
power supply
Member of the 'Green Dot'
recycling scheme
Recyclable