Comet PTO RW 15/150 Manuel D'utilisation Et D'entretien page 27

• The water cleaner must not be used to wash people, animals, energized electrical appliances,
delicate objects or the high pressure cleaner itself.
• This high pressure cleaner was designed to be connected up to category 1 tractors only.
• The high pressure cleaner is not suitable for use in certain situations such as in corrosive or
explosive atmospheres.
• Contact the Manufacturer's service centre before use on board vehicles, ships or airplanes,
as there may be additional instructions for use.
Any other use is considered improper.
The Manufacturer is not liable for any damage caused by improper or incorrect use.
2.4 I
dentIfIcatIon
fi«
warNING
• Should the identification label or warning labels become damaged due to regular use, contact
your dealer or an authorised service centre to buy new labels.
See Fig. 1, 5 and 7 at the front of these operating and maintenance instructions.
The identification label (28) contains the serial number and the main technical specifications of
the water cleaner.
The warning labels (27) inform you of any other risks that may arise when using the cleaner,
namely:
ATTENTION: Read the instructions manual
A1
before attempting any work on the machine.
ATTENTION: Switch off the engine and
A2 remove the key before attempting any main-
tenance or repair work.
ATTENTION: Injury hazard due to jets at
A3
high pressure.
ATTENTION: Do not aim the high pressure
A4 jet towards people, animals or energized
electrical apparatus.
ATTENTION: Injury hazard due to high pres-
A5
sure liquids.
ATTENTION: Crushing hazard: do not re-
A6 main standing between the tractor and the
machine.
ATTENTION: Risk of being caught up by the
A7
cardan shaft.
ATTENTION: Risk of being caught up:
A8 always stay at a safe distance from the car-
dan shaft.
ATTENTION: Do not stand on the machine
A9
when it is running or being moved.
3 I
nstallatIon
fi«
warNING
• The high pressure cleaner may only be assembled by a Skilled Technician, according to the
instructions provided in part two of this manual.
• Consult the operating and maintenance instructions manual for the tractor and cardan shaft,
with special reference to the safety instructions.
• Place the tractor on flat ground and in a stable position, bringing it as close to the high pres-
l W
abel and arnInG
l
abels
ATTENTION: Crushing hazard: do not ap-
A10 proach moving mechanical parts with your
hands.
ATTENTION: Before connecting up the car-
A11 dan shaft to the tractor, check the direction of
rotation and rate (540 rpm) are correct.
ATTENTION: Before connecting up the car-
A12 dan shaft to the tractor, check the direction of
rotation and rate (1000 rpm) are correct.
A13 ATTENTION: You must wear safety earmuffs.
A14 ATTENTION: Wear closely-fitting clothing.
A15 ATTENTION: Wear work gloves.
A16 ATTENTION: You must wear safety boots.
A17 Hook up point on the machine for lifting.
EN - 27