Mounting The Device; Important Notes - Lenze 9400 E94BSHE Série Instructions De Montage

5

Mounting the device

Important notes

5 Mounting the device
5.1 Important notes
)
Note!
The devices must be installed in housings (e.g. control cabinets) to meet
applicable regulations.
The mounting location must always comply with the operating conditions specified
ƒ
in the technical data (¶ 89). Take additional measures if necessary.
The mounting plate of the control cabinet must have the following properties:
ƒ
– electrically conductive
– free of lacquer
The mechanical connections must always be ensured.
ƒ
A free air circulation must be ensured for dissipating the heat.
ƒ
The described EMC properties are provided if the following conditions are complied
ƒ
with:
– The devices are mounted according to the arrangement concept described.
– The prepared cables are used and remain unchanged.
94
l
EDK94SH366 DE/EN/FR/ES/IT 7.0