1. Manuels
  2. Marques
  3. Lenze Manuels
  4. Servocommandes
  5. 9400 E94 MHE Série
  6. Instructions de montage

Mounting The Standard Device - Lenze 9400 E94 MHE Série Instructions De Montage

Masquer les pouces
Table des Matières

Publicité

7

Mounting the standard device

7
Mounting the standard device
How to proceed:
1. Insert the device into the installation backplane without twisting it until resistance
is felt.
2. Press the device into the installation backplane until it audibly snaps into place. The
locking clip moves downwards and back into the locking position.
3. The end position is reached when the locking clip can be pressed against the device.
Now the device is locked.
Fig. 7−1
Proceed as follows to remove the device:
1. Disconnect already wired connectors at the device.
2. Push the locking clip downwards to release the device and disengage it from the
contacts.
3. Pull the device completely out of the installation backplane and remove it. The
locking clip moves back into the locking position.
68
Installation of the device
l
SSP94GG122
EDK94AMH24 DE/EN/FR/ES/IT 6.0

Publicité

Table des Matières
loading

Manuels Connexes pour Lenze 9400 E94 MHE Série

Contenu connexe pour Lenze 9400 E94 MHE Série

Ce manuel est également adapté pour:

E94 she single drive highline sérieE94 she single drive stateline série

Table des Matières