Wiring The Device Modules; Communication Modules - Lenze 9400 E94BSHE Série Instructions De Montage

7

Wiring the device modules

The equipment of the device with modules depends on the device variant or on the
application. A nameplate on the side of the device serves to identify already equipped
device modules.
A short description of the different device modules follows. More detailed information is
given in the corresponding documentation.
7.1

Communication modules

Use these modules in slot þ MXI1 or þMXI2 oMMI oMSI.
Communication and extension modules can be used to adapt the Servo Drives 9400 to the
machine requirements. For this, the HighLine version is equipped with module slots MXI1
and MXI2.
The following possible combinations are permissible:
E94AYFLF E94AYCCA
MXI2
þ
E94AYFLF −
þ
E94AYCCA
−
þ þ
E94AYCDN
þ þ
E94AYCET
þ þ
E94AYCEN
þ þ
E94AYCEP
þ þ
E94AYCEC
þ þ
1)
E94AYCPM
þ þ
1)
E94AYCER
þ þ
E94AYCEO
þ þ
E94AYCIB
EDK94SH366 DE/EN/FR/ES/IT 7.0
E94AYCDN E94AYCET E94AYCEN
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ
−
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ Permissible
− Not possible
PROFIsafe can only be used in MXI1
1)
E94AYFLF Master frequency
E94AYCCA CANopen®
E94AYCDN DeviceNet™
E94AYCET EtherCAT®
E94AYCEN Ethernet 2 Port
E94AYCEP POWERLINK MN/CN
E94AYCEC POWERLINK CN
E94AYCPM PROFIBUS®
E94AYCER PROFINET®
E94AYCEO EtherNet/IP™
E94AYCIB INTERBUS
l
Wiring the device modules
Communication modules
MXI1
E94AYCEP E94AYCEC E94AYCPM
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
7
E94AYCER E94AYCEO E94AYCIB
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
þ þ þ
129