Setting The Clock - Bose Wave Music System Manuel D'utilisation

Setting the clock

Time
3. Unwind and straighten the power cord to ensure the best FM reception. Your Wave
music system uses the power cord as an FM antenna.
After plugging in your Wave
music system is easily operated using the remote control. Just aim the remote at the front panel
and press the buttons.
1. Press and hold Time – or Time + for one second until
– CLOCK SET – appears on the display.
2. Press Time – to adjust the displayed time backward or
press Time + to adjust the displayed time forward until
it matches the current time. You can also press and hold for rapid adjustment.
3. Wait five seconds for the system to exit the clock setup mode automatically.
To change the clock display from 12-hour (AM/PM) time to 24-hour (Military) time, see
"Changing the clock time format" on page 22.
Note: In the event that the Wave
settings are stored in backup memory for up to 48 hours. This feature retains the systems set-
tings when you unplug and move the unit or when a power outage occurs.
Note: Press-and-hold operations require holding the button down for at least one second.
Setting Up Your Wave
3
® music system, set the clock using the remote. Your Wave
® music system loses power, the clock time and other system
®
Music System
®
®
5