Adjusting The Amount Of Froth; Making Cappuccino And Milk-Based Coffees Automatically; Cleaning The Milk Container After Use - DeLonghi ECAM35075 Mode D'emploi

5. Remove the hot water spout (C6) from the connection noz-
zle (A8) (fig. 17);
6. Attach the container to the connection nozzle and push
as far as it will go (fig. 18). The machine emits a beep (if
enabled);
18 16
7. Place a sufficiently large cup under the coffee spouts (A9)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(fig. 19);
8. Follow the instructions below for each function.

11.2 Adjusting the amount of froth

20
Dial Description
position
No froth
Min. froth
Max. froth
19
Turn the froth adjustment dial
(D1) (fig. 20) to adjust the
amount of froth on the milk de-
livered while making cappucci-
nos and milk-based coffees.
Recommended for...
HOT MILK (not frothed) /
LATTE
LATTE MACCHIATO/
FLAT WHITE
CAPPUCCINO/ CAPPUCCI-
NO+ / ESPRESSO MACCHIA-
TO / HOT MILK (frothed)
11.3 Making cappuccino and milk-based coffees
automatically
1. Fill the milk container (D) and attach it as described above;
2. Select the desired beverage:
Directly selected beverages:
• : CAPPUCCINO (B11)
• : Latte (B12)
• : Hot Milk (B13)
Select by pressing
• Cappuccino+
• Latte macchiato
• Flat white
• Espresso macchiato;
3. After a few seconds, preparation begins automatically, a
progress bar appears on the display and gradually fills as
preparation proceeds;
4. After delivering the milk, the machine automatically
makes the coffee (if required by the recipe).
Please note:
• If you want to interrupt preparation during delivery, press
the arrow corresponding to "STOP" (B4).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (41°F / 5°C is ideal), the
poorer the quality of froth produced.
• The beverages can be customised (see sections "7.3 Pro-
gram beverages" and "7.4 Program My beverages").

11.4 Cleaning the milk container after use

Important! Danger of burns
• When cleaning the internal tubes of the milk container (D),
a little hot water and steam may leak out out of the milk
spout (D5). Avoid contact with splashes of water.
"Set dial to CLEAN, ESC to cancel" appears on the display (B1)
each time you use a milk function. Clean as described to elim-
inate all milk residues (or press " /ESC" (B5) to clean later):
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout;
14
(B14):
21 22