Special Features - Etac immedia E-Board L Mode D'emploi

Notice

Special features

Always check the product before use and after washing.
Never use a defective product. If the product shows signs of
wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers.
For further information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible
To ensure that the user feels safe and that every manual
handling is smooth, always plan the manual handling in
advance.
Material and cleaning
Material:
Polyethylene. (HDPE)
The product should be checked regularly, preferably each time
it is used.
Never try to repair a product yourself.
Never use a defective product.
There is a risk that the user may slide off. Never leave
the user alone on the edge of the bed.
Never leave the product on the floor.
Always conduct a risk assessment, and ensure that
the assistive product can be used for the individual
user and, in combination with other devices, that it is
safe for the user and carers.
Never use the product under wet conditions as the
underside of the board may become slippery in
contact with water.
Remember to apply brakes to lock bed and
wheelchair (Illustration 3).
If in any doubt - please contact Etac.
Washing instructions:
E-Board can be wiped with soapy water or disinfectant.
This product can be cleaned with a solvent-free cleaning agent
with a pH level between 5 and 9, or a 70% disinfection solution.
6