Special Features - Etac immedia EasyTurn Mode D'emploi

Notice

Special features

Always check the product before use and after washing.
Never use a defective product. If the product shows signs
of wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers. For further
information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual
handling is smooth, always plan the manual handling
in advance.
Material and cleaning
Material:
Top side: Polyester
Inner surface: Nylon
Back side: Non-Slip
Connector disc: synthetic.
The product should be checked regularly, preferably each time
it is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.
Never leave the product on the floor.
For optimal turning effect, make sure that the user
is seated in the middle of EasyTurn.
Do not take EasyTurn apart – For safety reasons,
if the components are taken apart, they may not be
put together again. In such cases, the product must
be scrapped.
Always conduct a risk assessment, and ensure that
the assistive product can be used for the individual
user and, in combination with other devices, that it is
safe for the user and carers.
If in any doubt - please contact Etac.
Washing instructions:
Do not use fabric softener.
Clean the product with a solvent-free cleaning agent with
a pH level between 5-9, or a 70% disinfection solution.
6