Power Function; Power Management; Using The Timer; Count Down Timer - AEG HD634170NB Notice D'utilisation

4.6 Switching on and off the

power function

The power function gives more power to
an induction cooking zone for no longer
than 10 minutes. After that time, the in-
duction cooking zone automatically sets
back to . To start it , touch
comes on. To stop it, set a heat setting
between and

Power management

The power management divides the
power between two cooking zones. The
power function increases the power to
the maximum level for one cooking zone
in the pair and automatically decreases
in the second cooking zone to a lower
power level. The display for the reduced
zone alternates. The priority is given to
the last set zone.

4.7 Using the Timer

Count Down Timer

Use the Count Down Timer to set how
long the cooking zone operates for one
cooking session.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• Selection of the cooking zone:touch
again and again until the indicator
of a necessary cooking zone comes
on.
• Starting the Count Down Timer:
touch of the timer to set the time (
00 99
- minutes). When the indicator
of the cooking zone flashes slower, the
time counts down.
• Checking the remaining time: select
the cooking zone with
tor of the cooking zone flashes faster.
The display shows the remaining time
of the zone that will stop first.
• Changing the Count Down Timer:
select the cooking zone with
or .
• Stopping the timer: select the cook-
ing zone with . Touch
maining time counts backwards to
and
.
. The indica-
touch
. The re-
00
. The indicator of the cooking zone
goes out. To switch off You can also
touch and at the same time.
When the time elapses, the sound op-
00
erates and flashes. The cooking
zone switches off.

Minute Minder

You can use the timer as a Minute Mind-
er while cooking zones do not operate.
Touch . Touch
select the time. When the time elapses,
the sound operates and
• Stopping the sound: touch

4.8 Starting the STOP+GO

The function sets all cooking zones
that operate to a keep warm setting.
• Touch
to start this function. The
symbol comes on.
• Touch
to stop this function. The
heat setting that you set before comes
on.
does not stop the timer function.
fully locks the control panel but not
the sensor field .
4.9 Locking / unlocking the

control panel

You can lock the control panel. It pre-
vents an accidental change of the heat
setting.
First set the heat settings.
To start this function touch
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.

4.10 The Child Safety Device

This function prevents an accidental op-
eration of the hob.
Starting the Child Safety Device
• Start the hob with
heat setting.
ENGLISH
11
or of the timer to
00
flashes.
. The sym-
. The heat
.Do not set the