The Heat Setting; Automatic Heat Up; Power Function - AEG HC451220EB Notice D'utilisation

All manuals and user guides at all-guides.com
Heat setting
8 - 9
10 - 14

4.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
0 3 5

4.4 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch ( comes on).
Immediately touch the correct heat
setting. After 3 seconds
To deactivate the function: change the
heat setting.

4.5 Power function

This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
The hob deacti-
vates after
4 hours
1.5 hour
8 10 14 P
comes on.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch . comes on.
To deactivate the function: change the
heat setting.
4.6 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
The selection of the Timer function is
possible when the cooking zone is active
and the heat setting is set.
To activate the function: touch
the timer to set the time (00 - 99
minutes). When this function is active,
comes on.
To see the remaining time: touch
again and again until
display shows the remaining time.
To change the time: touch
again until comes on. Touch
To deactivate the function: touch
again and again until
Touch . The remaining time counts
back to 00.
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the cooking zone operates.
To activate the function: touch
symbol goes out and
To see how long the cooking zone
operates: touch again and again until
comes on. The display shows how
ENGLISH 9
of
comes on. The
again and
or .
comes on.
.
. The
comes on.