Suzuki 57100-2884 Serie Instructions D'installation page 17

When the grip heater does not operate normally, check the following
items, and consult your SUZUKI Dealer from whom you bought the prod-
uct.
• Grip heater does not operate. Or it can not be adjusted.
1. Has the engine started?
2. Is the grip heater switch set on the position between
LEVEL1 LEVEL3?
• Grip heater temperature is too low or too high.
1. Have you adjusted the grip heater switch to be set between LEVEL1
LEVEL3?
2. When the temperature is too high, set the switch on LEVEL1 or OFF,
or wear a thick pair of gloves.
• Whole surface of the grip heater is not warmed.
1. This is no failure.
In order that the fingertips may be warmed, the heat distribution is
made to concentrate mostly to the position where the fingertips come
to contact.
• Grip heater switch indicator blinking every 2 seconds.
1. Too low battery voltage.
Recharge the battery fully.
GENUINE SUZUKI ACCESSORIES
17/17