Suzuki 57100-2884 Serie Instructions D'installation page 11

Connection of Grip Heater Lead Wire
1. Pass the Grip Hater Lead Wire 3 along the wiring harness and fix
them using the Clamps 6 as shown in the illustration.
2. Connect the Grip Hater Lead Wire 3 to the vehicle harness coupler.
NOTE:
• Be sure there should be no excessive tension nor remarkable slack in
the grip heater lead wire.
• Cut off the excess clamps.
3 3
1. Pass the grip heater lead wire under the TO sensor.
2. Clamp the grip heater lead wire and wiring harness.
3. Grip heater lead wire
4 4
3 3
2 2
GENUINE SUZUKI ACCESSORIES
1 1
3 3
2 2
4. TO sensor
11/17
2 2